Giken Silent Piler F301
Giken Silent Piler F301
Optimising work efficiency with a modular design
The Giken Silent Piler F301 adapts to Standard, Water Jetting, and Super Crush press-in works by changing the chuck, chuck frame and attachments. The machine can be utilised more efficiently as it’s adjustable to various soil and working conditions.
Pile installation into hard ground
Giken’s original ‘Pilot Coring Theory’ enables the hard ground press-in method to install sheet piles into difficult ground conditions such as gravelly, cobble or boulder mixed soils without losing advantages. The augering area can be reduced to assist pile installation, minimising volume of spoil and disturbance to the soil strata, resulting in high bearing capacity for sheet piles installed by this method.
For wider Z and U sheet piles
The F301 has been designed to press-in Z piles to 708mm wide and U piles up to 750mm wide.
Low emission engine
The power unit of the F301 is a new generation model and has environmentally-friendly specifications. It is designed with strict concepts for clean emissions with high combustion efficiency and Giken original hydraulic control technologies.
Ultra low noise level
It clears allowable construction noise levels in many industrialised countries.
Standard application of bio-degradable oil
The F301 uses bio-degradable Piler EcoTM Oil and Piler Eco Grease. So, if hydraulic oil or grease is spilled into soil or water, there will be no environmental damage to the surrounding ecosystem. In addition, the machines are painted with TX-Free non-leaded paint.
*Environmentally-friendly paint which doesn’t contain toluene, xylene lead-based pigment.
Locking function
Lock functions in the leader mast, chuck and clamps secure the Silent Piler against drilling torque. Increasing drilling efficiency and accuracy of pile installation.
Supercrush mode F301 - Z sheet piles (575~708P), U sheet piles (600~750P) | |
|---|---|
| Maximum press-in force | 800kN |
| Maximum extraction force | 900kN |
| Stroke | 850mm |
| Control system | Radio control |
| Movement | Self-moving |
| Mass | 15,630kg (main body and hose reel) |
Hose reel HR17D | |
| Mass (standard) | 2,780kg (inc. hose reel bracket) |
Piler auger PA22 | |
| Applicable pile length (standard) | Maximum 24m (30m in special mode) |
| Mass | 1,850kg (auger motor) |
Pile lengths | Assembledlength | Mass |
|---|---|---|
| 10m | 12.5m | 6,750kg |
| 12m | 19.5m | 7,650kg |
| 16m | 24.0m | 9,050kg |
Power unit EU300L5 | |
|---|---|
| Power source | Diesel engine |
| Rated output | 255kW / 1,800min-1 |
| Fuel tank capacity | 500L |
| Hydraulic reservoir | 490L (Piler EcoTM Oil) |
| AdBlue®/DEF tank capacity | 57L |
| Total mass | 7,250kg |
Reaction stand | |
| Mass | 3,000kg |
| Area requirement | 7x7m |
Standard and water jet mode F301 - Z sheet piles (575~708P), U sheet piles (600~750P) | |
|---|---|
| Maximum press-in force | 1,000kN |
| Maximum extraction force | 1,200kN |
| Stroke | 850mm |
| Press-in speed | 2.0~43.5 m/min (standard mode) |
| Extraction speed | 1.5~32.3 m/min (standard mode) |
| Control system | Radio control |
| Movement | Self-moving |
| Mass | 12,520kg (water jetting mode - main body and piler jet reel) 11,700kg (standard mode - main body) |
Piler Jet ReelTM JR28 | |
| Applicable pile length | Standard 17.0m (maximum 27.0m) |
| Mass | 820kg |